Stainless Steel Wet Bench Systems
Home / Wet Benches / Stainless Steel Wet Bench Systems
Stainless Steel Solvent Stations for clean room applications
Modutek’s Stainless Steel Solvent Stations are available in Dry to Dry configuration, Fully Automated, Semi Automated, manual bench and Fume Hood design. With stainless steel construction solvent applications are easily achieved. Acetone, IPA and photo resist striping are just a few process options available. Our SolidWorks Simulation Professional and SolidWorks Flow Simulation give you the process flow characteristic you require. This advanced software will improve your etch rates and throughput which increases your yields. If required, all robotic equipment is designed, assembled and tested at our San Jose, CA. We do not outsource or subcontract our robotic design. Final acceptance testing of our Stainless Steel Solvent Stations at Modutek is always available. All testing is performed using DI water.
Stainless Steel Solvent Stations for clean room applications
Modutek’s Stainless Steel Solvent Stations are available in Dry to Dry configuration, Fully Automated, Semi Automated, manual bench and Fume Hood design. With stainless steel construction solvent applications are easily achieved. Acetone, IPA and photo resist striping are just a few process options available. Our SolidWorks Simulation Professional and SolidWorks Flow Simulation give you the process flow characteristic you require. This advanced software will improve your etch rates and throughput which increases your yields. If required, all robotic equipment is designed, assembled and tested at our San Jose, CA. We do not outsource or subcontract our robotic design. Final acceptance testing of our Stainless Steel Solvent Stations at Modutek is always available. All testing is performed using DI water.
Benefits
- 304 Stainless steel station material
- Solvent stations designed with fire suppression
- Complete design, assembly and test at one location
- Over 30 years of continuous operation
- SolidWorks Flow Simulation software
- SolidWorks Simulation Professional software
Standard Features
- 304 stainless steel material of construction
- Available in any size and length to meet you requirement
- All stations wired per NFPA 70 & 79
- Emergency Power Off (EPO) with mushroom button and all safety interlocks
- All solvent tanks equipped with 1” lip exhaust
- N2 head case purge with interlock
- Photohelic with interlock to EPO
- PVC safety shields
- Teflon N2 gun and DI water hand spray
- Continuous flow DI water manifold
- Casters and leg levelers
- One year warranty on all parts
- 2 copies paper manual and one complete set of paperless
Options
- PCL with touch screen/GUI (graphic user interface)
- Servo motors with encoder feed back
- Ultrasonic energy
- Rear access design
- Data logging
- On line support
- Resistivity monitoring control
- All Teflon plumbing
- In house SolidWorks Flow Simulator software with report and drawings including 3D model
- In house SolidWorks Simulator Professional with reports and drawings including 3D model
- Chemical management interface
- Third party certification for NFPA 70 & 70
- Semi standard, CE mark and NEC certification available
- Seismic zone 4 structural certification
- Fan Filter Units (HEPA)
- Lift station designed into bench
- Dedicated drains to carboy with DOT containment
- Overhead deck lighting
- Light tower (3-color)
- Extended warranty available
Applications
- Acetone
- IPA
- Photo Resist Striping
- EDP
Benefits
- 304 Stainless steel station material
- Solvent stations designed with fire suppression
- Complete design, assembly and test at one location
- Over 30 years of continuous operation
- SolidWorks Flow Simulation software
- SolidWorks Simulation Professional software
Standard Features
- 304 stainless steel material of construction
- Available in any size and length to meet you requirement
- All stations wired per NFPA 70 & 79
- Emergency Power Off (EPO) with mushroom button and all safety interlocks
- All solvent tanks equipped with 1” lip exhaust
- N2 head case purge with interlock
- Photohelic with interlock to EPO
- PVC safety shields
- Teflon N2 gun and DI water hand spray
- Continuous flow DI water manifold
- Casters and leg levelers
- One year warranty on all parts
- 2 copies paper manual and one complete set of paperless
Options
- PCL with touch screen/GUI (graphic user interface)
- Servo motors with encoder feed back
- Ultrasonic energy
- Rear access design
- Data logging
- On line support
- Resistivity monitoring control
- All Teflon plumbing
- In house SolidWorks Flow Simulator software with report and drawings including 3D model
- In house SolidWorks Simulator Professional with reports and drawings including 3D model
- Chemical management interface
- Third party certification for NFPA 70 & 70
- Semi standard, CE mark and NEC certification available
- Seismic zone 4 structural certification
- Fan Filter Units (HEPA)
- Lift station designed into bench
- Dedicated drains to carboy with DOT containment
- Overhead deck lighting
- Light tower (3-color)
- Extended warranty available
Applications
- Acetone
- IPA
- Photo Resist Striping
- EDP
Benefits
Benefits
- 304 Stainless steel station material
- Solvent stations designed with fire suppression
- Complete design, assembly and test at one location
- Over 30 years of continuous operation
- SolidWorks Flow Simulation software
- SolidWorks Simulation Professional software
Features
Standard Features
- 304 stainless steel material of construction
- Available in any size and length to meet you requirement
- All stations wired per NFPA 70 & 79
- Emergency Power Off (EPO) with mushroom button and all safety interlocks
- All solvent tanks equipped with 1” lip exhaust
- N2 head case purge with interlock
- Photohelic with interlock to EPO
- PVC safety shields
- Teflon N2 gun and DI water hand spray
- Continuous flow DI water manifold
- Casters and leg levelers
- One year warranty on all parts
- 2 copies paper manual and one complete set of paperless
Options
Options
- PCL with touch screen/GUI (graphic user interface)
- Servo motors with encoder feed back
- Ultrasonic energy
- Rear access design
- Data logging
- On line support
- Resistivity monitoring control
- All Teflon plumbing
- In house SolidWorks Flow Simulator software with report and drawings including 3D model
- In house SolidWorks Simulator Professional with reports and drawings including 3D model
- Chemical management interface
- Third party certification for NFPA 70 & 70
- Semi standard, CE mark and NEC certification available
- Seismic zone 4 structural certification
- Fan Filter Units (HEPA)
- Lift station designed into bench
- Dedicated drains to carboy with DOT containment
- Overhead deck lighting
- Light tower (3-color)
- Extended warranty available
Applications
Applications
- Acetone
- IPA
- Photo Resist Striping
- EDP
Modutek’s Stainless Steel Wet Bench Systems can be customized as needed to meet your specific wet process requirements.