Earlier this year Modutek started implementing its new SPM process with automatic adjustment of the sulfuric peroxide mix concentration and the company now has benchmark results from real process applications. Normally the SPM mixture deteriorates continuously as the hydrogen peroxide turns to water and dilutes the concentration. The SPM mixture has to be completely replaced every eight hours or so at the outside. Costs are substantial for downtime during new mixture pour and for the replacement of the chemicals as well as for neutralizing and disposing of the corrosive mixture in an environmentally safe way. Trying to lengthen the period during which an SPM mixture can be used has been an ongoing process for many companies but without results that provide a safe and reliable alternative.
In the Modutek “Bleed and Feed” system, a “dirty” tank and a “clean” tank are used to continuously compensate for changes in the mixture concentration caused by the degradation of hydrogen peroxide. Periodically when needed, a programmable amount of mixture is drained from the dirty tank and another programmable amount of mixture is automatically transferred from the clean tank to the dirty tank. To compensate, an appropriate amount of sulfuric acid is added to the clean tank and both tanks receive enough hydrogen peroxide to restore the concentration. The “Bleed and Feed” process is designed to maintain the SPM mixture concentration automatically over extended periods.
Benchmark Results from a Real “Bleed and Feed” Application
One of Modutek’s customers that use their semiconductor manufacturing equipment now has real-life results from the use of the company’s “Bleed and Feed” SPM process improvements. The results show significant reductions in chemical use, downtime for re-pour and disposal volumes. Detailed results are based on a 2 6-inch carrier bath size with an 8-hour shift and are as follows:
- Volume of sulfuric acid used reduced by 77%
- Chemical disposal volume reduced by 75%
- Acid neutralizer use reduced
- Acid re-agent use and cost reduced
- No downtime to drain and re-pour
- System drains reduced from three times a day to once a week
- Increased throughput
- No original process result changes
- Increased safety due to less operator interaction with dangerous chemicals
While other companies have tried to develop other SPM clean process improvements involving less chemical use, Modutek’s system is now proven to provide excellent results in real life applications and operate reliably.
Improved SPM Process in Custom Designed Systems
While Modutek has developed a greatly improved method for maintaining SPM process mixture concentrations and reducing chemical use, the new method can be applied in any custom-designed SPM process wet bench. Modutek designs and assembles wet bench products and semiconductor manufacturing equipment at their facility in San Jose, California and can supply systems that exactly meet its customers’ requirements.
Process engineers and facility managers concerned about the environmental impact of high toxic chemical use and the increasing costs of chemicals such as sulfuric acid can contact Modutek for a free quote or consultation to discuss solutions to these issues. Modutek can suggest wet bench systems and follow up with proposals from their complete line of wet bench products. If the SPM process is needed by a customer, Modutek now has the benchmark results on reduced chemical use and improved facility operation.