Improving Standard Clean Particle Removal in a Wet Bench Process
When silicon wafer yields are not improved with the Standard Clean process, improved particle removal can be achieved with advanced processing equipment. Standard Clean or RCA clean was developed by the RCA company in 1965 and it has changed little since then. It has always been successful in cleaning wafers and removing most particles. However, […]
The Importance of Pre-Diffusion Cleans in Silicon Wafer Cleaning
When wafer cleaning immediately prior to diffusion is effective, semiconductor manufacturing output is of high quality and the defect rate is reduced. A major pre-occupation of pre-diffusion cleaning is the removal of microscopic particles from the surface of the silicon wafer. Particles can prevent even diffusion and may themselves be diffused into the silicon, causing […]
How Innovative Changes to the SPM Process Improves Results
When the SPM process requires frequent spiking with hydrogen peroxide, precise control is difficult and the useful lifetime of the mixture is reduced. The SPM process, using a mixture of sulfuric acid and hydrogen peroxide, is a popular wafer cleaning process because it quickly removes large amounts of organic material from the surface of silicon wafers. It […]
How Megasonic Cleaning Reduces Costs and Improves Silicon Wafer Yields
Between process steps that etch silicon wafers and deposit circuit paths, semiconductor manufacturing relies on wafer cleaning to remove material from previous process steps and microscopic contaminating particles. As structures and circuits on wafers decrease in size, even the tiniest particles can interfere with etching and the creation of circuits and micro-structures. Such interference can […]
Improving Piranha Etch Process Results in Silicon Wafer Cleaning
Piranha etch is a popular process for silicon wafer cleaning, but it has to be tightly controlled to be effective. The mixture of about one part hydrogen peroxide and three parts sulfuric acid rapidly removes organic matter from silicon wafers. The etch process takes place in heated quartz tanks where both temperature and chemical concentration […]
Improvements to the SPM Process Provides Significant Results
Wet bench semiconductor manufacturing relies on the SPM wafer cleaning process to quickly strip photoresist and other residue from silicon wafers. Because the hydrogen peroxide in the sulfuric acid peroxide mixture is unstable, hydrogen peroxide continuously degrades into water and the degradation is accelerated if the mixture is heated to increase the strip rate. To […]
Why High Temperature Quartz Baths Are Required for Silicon Wafer Cleaning
Silicon wafers undergo many process steps during the manufacture of semiconductor components and cleaning the wafers properly is an important factor in successful fabrication. Process steps include etching and diffusion, both of which involve coating the wafer with masking material to guide the etching chemicals or diffusion targets. Once a step is completed, the masking […]
Improving Silicon Wafer Cleaning with the Piranha Etch Process
The Piranha etch process removes organic material from silicon wafers rapidly and completely. Semiconductor manufacturing involves the repeated etching and cleaning of the silicon wafers and the Piranha mixture is a favorite method for the resist strip of wafers to prepare them for further processing. Modutek can provide high temperature re-circulating and constant temperature quartz […]
Why Pre-Diffusion Cleans Are Important for Silicon Wafer Cleaning
Pre-diffusion cleans are carried out several times during the semiconductor manufacturing process, and each time the chemical residues and particles on the wafers have to be removed as completely as possible. If silicon wafers still have surface contamination when they are placed in the diffusion oven, diffusion may be uneven and the resulting semiconductor products […]